• Test Probe B of IEC61032

  The Jointed Test Finger is a precision test probe made according to Figure 2 (Fig. 2) of the IEC 61032 (Test probe B) and is used to simulate a human finger. It is also used by the standards of CSA, I

• Unjointed Test Finger - Test Probe 11 of IEC61032

  The Rigid Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of CSA, IR

• Milling Grinding Probes - Test Probe 31 of IEC61032

  This probe is intended to verify the protection against access to hazardous mechanical parts of the grinding system of food waste disposal units.

• EN62262 IK07 Spring Impact Hammer Test Device of 2 Joules

  EN62262 Spring Impact Hammer Test Apparatus is strictly designed according to IEC60068-2-75,GB/2423.55-2006.GB4706.1 and GB8898 standard.

• Detail of scratching tool tip of IEC60335-2-24

  The scratching tool tip is for home appliances whose accessible element surface of all protected cooling system, including the c accessible element surface that have close contact with a protected coo

• Test Finger Nail with 50N Force of IEC60335

  Test Finger Nail meets the standard requirements of IEC60335 UL1025 UL1278 UL507. The Test Finger Nail is a wide range of probes to meet the most common standards including those from IEC, EN, UL, GB,

• 535g Steel Sphere of Impact Test

  The Impact Test Ball is a specially machined ball to test impact resistance according to International Standards. It is made of chrome-plated steel for durability, and is fitted with an eyelet to faci

• 50mm Diameter Test Steel Ball of IEC60950

  The Impact Ball 50mm is designed to test impact according to IEC, UL, and CSA standards. The Impact Ball complies with IEC 60950. It is made of stainless steel.

• 12.5 mm Test Sphere with Handle of DIN 40050

  According to the DIN40050 IEC60529.

• Test Probe for Measuring Surface Temperatures of IEC 60335-2-11

  According to IEC60335-2-11:1993 figure 101 and IEC60335-2-6:1997, such as requirements preconditioning of household and similar electrical appliances drum dryers and in vertical ranges, hobs, ovens an

CATEGORIES